rabbitmq esp8266 mqtt -> amqp

ESP8266 을 사용하여 수집된 데이터를 rabbitmq 에 전송하고, 
AQMP 를 사용하여 데이터를 수집하는 코드 샘플.






receive.py

#!/usr/bin/env python
import pika

credentials = pika.PlainCredentials('test', 'testpass')

parameters = pika.ConnectionParameters('192.168.1.28',
                                   5672,
                                   '/energy',
                                   credentials)

connection = pika.BlockingConnection(parameters)
channel = connection.channel()

channel.exchange_declare(exchange='amq.topic', type='topic', durable=True)

result=channel.queue_declare(exclusive=True)

queue_name=result.method.queue

channel.queue_bind(exchange='amq.topic', 
                      queue=queue_name,
                      routing_key="outTopic")

def callback(ch, method, properties, body):
    print(" [x] Received %r" % body)

channel.basic_consume(callback,
                      queue=queue_name,
                      no_ack=True)

print(' [*] Waiting for messages. To exit press CTRL+C')
channel.start_consuming()

ESP12-MQTT-example01.ino 

/*

 Basic ESP8266 MQTT example

 This sketch demonstrates the capabilities of the pubsub library in combination

 with the ESP8266 board/library.

 It connects to an MQTT server then:

  - publishes "hello world" to the topic "outTopic" every two seconds

  - subscribes to the topic "inTopic", printing out any messages

    it receives. NB - it assumes the received payloads are strings not binary

  - If the first character of the topic "inTopic" is an 1, switch ON the ESP Led,

    else switch it off

 It will reconnect to the server if the connection is lost using a blocking

 reconnect function. See the 'mqtt_reconnect_nonblocking' example for how to

 achieve the same result without blocking the main loop.

 To install the ESP8266 board, (using Arduino 1.6.4+):

  - Add the following 3rd party board manager under "File -> Preferences -> Additional Boards Manager URLs":

       http://arduino.esp8266.com/stable/package_esp8266com_index.json

  - Open the "Tools -> Board -> Board Manager" and click install for the ESP8266"

  - Select your ESP8266 in "Tools -> Board"

*/

#include <ESP8266WiFi.h>

#include <PubSubClient.h>

// Update these with values suitable for your network.

const char* ssid = "YOUR_SSID";

const char* password = "AP_PASSWORD";

const char* mqtt_server = "192.168.1.28";

WiFiClient espClient;

PubSubClient client(espClient);

long lastMsg = 0;

char msg[50];

int value = 0;

void setup() {

  pinMode(BUILTIN_LED, OUTPUT);     // Initialize the BUILTIN_LED pin as an output

  Serial.begin(115200);

  setup_wifi();

  client.setServer(mqtt_server, 1883);

  client.setCallback(callback);

}

void setup_wifi() {

  delay(10);

  // We start by connecting to a WiFi network

  Serial.println();

  Serial.print("Connecting to ");

  Serial.println(ssid);

  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {

    delay(500);

    Serial.print(".");

  }

  Serial.println("");

  Serial.println("WiFi connected");

  Serial.println("IP address: ");

  Serial.println(WiFi.localIP());

}

void callback(char* topic, byte* payload, unsigned int length) {

  Serial.print("Message arrived [");

  Serial.print(topic);

  Serial.print("] ");

  for (int i = 0; i < length; i++) {

    Serial.print((char)payload[i]);

  }

  Serial.println();

  // Switch on the LED if an 1 was received as first character

  if ((char)payload[0] == '1') {

    digitalWrite(BUILTIN_LED, LOW);   // Turn the LED on (Note that LOW is the voltage level

    // but actually the LED is on; this is because

    // it is acive low on the ESP-01)

  } else {

    digitalWrite(BUILTIN_LED, HIGH);  // Turn the LED off by making the voltage HIGH

  }

}

void reconnect() {

  // Loop until we're reconnected

  while (!client.connected()) {

    Serial.print("Attempting MQTT connection...");

    // Attempt to connect

    if (client.connect("ESP8266Client", "test", "testpass")) {

      Serial.println("connected");

      // Once connected, publish an announcement...

      client.publish("outTopic", "hello world");

      // ... and resubscribe

      client.subscribe("inTopic");

    } else {

      Serial.print("failed, rc=");

      Serial.print(client.state());

      Serial.println(" try again in 5 seconds");

      // Wait 5 seconds before retrying

      delay(5000);

    }

  }

}

void loop() {

  if (!client.connected()) {

    reconnect();

  }

  client.loop();

  long now = millis();

  if (now - lastMsg > 2000) {

    lastMsg = now;

    ++value;

    snprintf (msg, 75, "hello world #%ld", value);

    Serial.print("Publish message: ");

    Serial.println(msg);

    client.publish("outTopic", msg);

  }

}